eliztech.com logo
Remote Controls > OFA Zapper+ programming

OneForAll Zapper+ programming instructions

OneForAll URC6820 Zapper+ universal remote

Programming instructions for One For All URC 6820 (Zapper+) universal remote controls.

Direct code entry

Step 1: Turn on your device (not on standby) and point the remote towards it.

Step 2: To set up:

TV: hold down "TV Power" and "STB Power" until the red LED blinks twice.

STB (Cable, Satellite, Freeview, DVB-T): hold down "Volume +" and "Channel +" until the red LED blinks twice.

AUDIO (Receiver, Sound Bar): hold down "Volume -" and" Channel -" until the red LED blinks twice.

Step 3: Enter the first 4 digit code listed for your brand. The red LED will blink twice.

Step 4: Now aim the remote towards your device and press the "Power" (or "Mute") key.

Step 5: If the device turns off (or mutes), your remote is ready to use. If not, repeat steps 2, 3 with the next code in the list.

Notes:

  • If you find one or more keys do not work as you expect, start again at step 2.
  • If you have already set up a Set Top Box and you are setting up Audio as well, please try the "Mute" key during step 4.
 

SimpleSet code search

SimpleSet is a quick and easy way of setting up your Zapper plus to control the most popular brands of each device type with only a few key presses, typically in under a minute per device. The first step is to select which device you are going to set up.

For each device type, there is a list of the top brands, each with a number assigned to it. Locate your device and brand in the tables below:

DigitTV Brand
1Bush
2Grundig
3LG
4Panasonic
5Philips
6Samsung
7Sharp
8Sony
9Thomson, TCL
0Toshiba
DigitAUDIO: Audio Sound Bars, AV Receivers etc.
1Bose
2Denon
3LG
4Marantz/Philips
5Onkyo
6Panasonic/Technics
7Pioneer
8Samsung
9Sony
0Yamaha
DigitSTB: Satellite, Cable, Freeview/DVB-T
1BSkyB/Sky Ireland/Orange
2Canal+/CanalSat/Digital+
3Dream Multimedia/TechniSat
4DStv/Multichoice/Foxtel/Sky New Zealand
5freebox/Tricolor TV/Vu+
6Humax
7Samsung
8Sky Italia/SFR/Neuf TV
9Sky Deutschland/Sky Österreich/T-Home/Deutsche Telekom
0UPC/Cablecom/UPC Direct/Virgin Media

To set up your device:

Step 1: Turn on your device and point the remote towards it.

Step 2:

TV: hold down "TV Power" and "STB Power" until the red LED blinks twice.

STB (Cable, Satellite, Freeview, DVB-T): hold down "Volume +" and "Channel +" until the red LED blinks twice.

AUDIO (Receiver, Sound Bar): hold down "Volume -" and" Channel -" until the red LED blinks twice.

Step 3: Hold down the digit for your brand and device as listed in the tables above (e.g. "8" for Sony TV).

Step 4: The remote will send the Power command every 3 seconds until your device switches off.

Step 5: As soon as your device switches off, release the digit.

Step 6: The red LED will blink twice and the remote should now operate your device.

Notes:

  • If you find one or more keys do not work as you expect, start again at step 2 - the remote will start with the next code in the memory.
  • If you set up a Set Top Box and then an Audio device, to turn the Audio device back on hold the "STB Power" key for 3 seconds - the key will send STB Power and then Audio Power.
 

Learning

To learn functions, the original remote should be approximately 3cm from the OFA remote, pointing towards it.

Step 1: Hold down "AV" and "EXIT" until the red LED blinks twice.

Step 2: Press and release the key you want to learn a function onto. The red LED will blink continuously.

Step 3: Press and release the corresponding key on the original remote.

Step 4: The red LED will blink twice to indicate the key has been learned correctly.

Step 5: Repeat steps 2 and 3 for each key you want to learn.

Step 6: When you learned all the functions you require, press and hold the "OK" key until the red LED blinks twice.

Notes:

  • You can learn from multiple remotes, but only one function per key.
  • Some remotes send commands differently. If you find a function cannot be learned, try holding down the key on the original remote instead of pressing and releasing.
  • If the red LED shows one long blink at step 4, the function was not learned correctly, try again from step 2.
  • If you find one or more keys don't work properly after set up, you can re-enter the learning mode at any time by repeating the procedure from step 1.
  • To delete a learned function, hold down "Guide" and "Menu" until the red LED blinks twice, and press the key you want to delete the function from twice.