eliztech.com logo
Remote Controls > U-verse S20/S30 programming

AT&T U-verse S20/S30 programming

U-verse S20-S1A remote control

Direct code entry instructions

Be sure that your device to be controlled is powered on and you can hear live audio before you start.

Step 1: Press and hold the "MENU" and "OK" keys simultaneously for 3 seconds until the "POWER" key flashes red twice.

Step 2: Enter the 5 digit code for your brand. The "POWER" key will flash red twice.

Step 3: Test the "POWER" and "VOLUME" keys to see if they control your TV or Audio device as expected. If not, repeat this process using the next code listed for your manufacturer.

Notes:

  • When an invalid code is entered, the power key will flash one long red blink and the remote will exit the programming mode without saving any changes.
  • If your TV programming was interrupted or inactive for more than 10 seconds, your backlit button will shut off, and you’ll need to restart the process.
  • Try every code under your manufacturer code list to find the one that works for your device.
  • If you've turned the backlighting feature off, you may not see the backlit buttons flash during the programming process.

Code search procedure

Step 1: Point the remote directly at the device you are trying to control. Press the "MENU" and "OK" keys simultaneously for 3 seconds until the "POWER" key flashes red twice.

Step 2: Press the orange "On Demand" key for TV or blue "Interactive" key for an Audio device, depending on what you are trying to control.

Step 3: While pointing the remote at your device, press and hold down the "FAST FORWARD" key and let go of the key as soon as the device responds. When holding down the "FAST FORWARD" key, the remote "POWER" key will flash red once every 3 seconds when it sends a code, to give the device time to respond and for you to release the key.

Step 4: TV programming: Let go of the "FAST FORWARD" key as soon as the TV turns off. Press the "POWER" button to turn the TV back on. For an audio device, let go of the "FAST FORWARD" key when the device mutes. Press "MUTE" to unmute the device. Use the volume keys to verify that the remote control is controlling the volume. If it does not work properly, repeat the process.

Note:

  • If TV programming is interrupted or inactive for more than 10 seconds, the "POWER" key will flash one long red blink and exit programming mode. This means the remote has returned to normal operation without saving changes.
 

Advanced Features - Setting volume controls

Once programmed, the volume controls are automatically assigned to control your TV unless an audio device is programmed into the remote control, which then sets the volume keys to control the audio device. This process shows how the volume controls can be set to control the volume and mute function of the device of your choice.

Step 1: Press and hold the "OK" and "MENU" keys simultaneously for 3 seconds until the "POWER" key flashes red twice.

Step 2: Press the "VOLUME UP" key. The "POWER" key will blink red once and remote backlighting will remain on.

Step 3: Select the device you wish to use for volume control. Press the orange "On Demand" key for TV, blue "Interactive" key for an Audio device or the green "My Multiview" key for a Set-Top-Box. The "POWER" key will flash red twice if the volume control is set to TV or Audio device, and 4 times if it's set to Set-Top-Box.

Setting up the power control

By default the "POWER" key will turn on and off the receiver each time it is pressed. Once programmed, the "POWER" key can also turn the TV and Audio device on and off. Use the instructions below to change the sequence these devices are powered on and off.

Step 1: Press and hold the "OK" and "MENU" keys simultaneously for 3 seconds until the "POWER" key flashes red twice.

Step 2: Press the "POWER" key. The "POWER" key will blink once and the remote backlighting will remain on.

Step 3: Program the power on and off sequence for your devices. Press the orange "On Demand" key for TV, blue "Interactive" key for an Audio device or the green "My Multiview" key for a Set-Top-Box. Press each key in the sequence you wish to turn on and off when the "POWER" key is pressed. The "POWER" key will flash red once for each device programmed.

Step 4: Press the "OK" key to save the power control settings. The "POWER" key will flash red twice.

Turn off the keypad backlighting

By default, your remote control is set with the backlight on. Here's how you can turn it off or back on:

Step 1: Press and hold the "OK" and "MENU" keys simultaneously for 3 seconds until the "POWER" key flashes red twice.

Step 2: Using the numeric keys on the remote, type in 9 7 2. The "POWER" key will flash 4 times to show backlighting is disabled. If you repeat this process, backlight will be enabled again and the "POWER" key will flash twice.